How To Get Washing Machine To Drain
How To Get Washing Machine To Drain. Move washing machine away from the wall. The drain hose resides behind your washer and connects the washing machine to your exterior washing machine.
Turn off the power and lay down towels. The drain hose resides behind your washer and connects the washing machine to your exterior washing machine. Ensure there’s at least 1/2 inch between the drainpipe and discharge hose to promote proper drainage.
The Hose Will Either Be Attached To Your Machine’s Back.
Either a 2 inch sanitary tee to branch the washing machine vent into the branch vent, an outdoor vent, or an air admittance valve. Begin by shutting down your machine. If it’s accessible, inspect and clean your washer’s lint trap or filter.
There May Be Two Of Them, So Choose One To Connect The Hose To.
Open the door of the washing machine,. Move washing machine away from the wall. If there is water in your washing machine and it hasn't been able to drain it, you have to get that water out.
Unplug It And Turn Off The Water Supply.
Snaking your washing machine drain; This hose connects your machine to the drain pipe in your wall or floor. Turning off the equipment might help a problem from growing worse.
Clear Out The Washing Machine.
Find the drain hose at the back of the washing machine. If not, follow these steps: Turn off the power supply or circuit breaker to the machine to prevent injury.
Grab Wrench And Disconnect Water Lines (Hot And Cold) On The Washing Machine.
Loosen all hoses inside the washing machine,. Ensure there’s at least 1/2 inch between the drainpipe and discharge hose to promote proper drainage. Underneath the sink, look for a bottle trap.
Post a Comment for "How To Get Washing Machine To Drain"